Axles/Kits/Bearings

•  5k axle assembly 
•  5/6k u-bolt kit 
•  10” brake drum 
•  Ball mount 
•  Bearings (sold per side)
•  2500 lb. bearing kit 
•  3500 lb. bearing kit  
•  6000 lb. bearing kit 
•  bearing buddies (1 set) 

Brackets

•   license plate light bracket (plastic or metal) 
•   prefabricated light bracket 
•   sealed beam light bracket
•   Chrome Cap/lugs (per axle)
•   5 or 6 lug chrome kit   (chrome kit #1 
•   8 lug chrome kit   (chrome kit #2) 

Couplers

•   2 5/16 adjustable coupler 
•   class 2 a-frame coupler 
•   class 2 straight 3” tube coupler  
•   class 4 a-frame 2 5/16 coupler  
•   large coupler locking pin (bulldog & atwood)  
•   small coupler locking pin (atwood, shelby, & fulton)  
•   wheel for 5k thru coupler 
•   Deck stain (gallon) 

Electrical

•   6 way plug  
•   7 way blade wire harness 
•   breakaway kit w/battery charging system  
•   breakaway switch 

Fenders

•   diamond plate fender step uninstalled
•   diamond plate fender step installed
•   fender back

 Single Axle Fender

•   12” 
•   13” 
•   14-15” 
•   tandem fender with back 
•   tandem 14-15 drop (10-3/4x68) w/tear drop no back 
•   tandem 14-15 straight (10x69) w/tear drop no back 
•   Tandem 16 strt/drop (12x68 w/tear drop no back

Frame caps

•   sizes 2” and smaller  
•   sizes above 2”  

Hanger kits

•   3.5k single 
•   3.5k tandem 

Lights

•   2” sealed beam red or amber side light  

  lenses 

•   4” square tail light lens (Peterson or wesbar)  
•   surface mounted red/amber clearance light lens 
•   license plate light, no bracket                 
•   license plate light with bracket                
•   rear facing floodlight with 12 volt battery & box  
•   reflector, amber or red 
•   surface mounted red/amber side light 

  tail lights

•   4” square tail light (peterson) 
•   low profile tail light (wesbar) 
•   oval sealed beam tail light 
•   Light Tube 4x3x..120 9” for seal beam lights 

Packaged parts

•   B501 1/4” d-ring w/bracket
•   B601K recessed rope ring 1200 lbs capacity 
•   B801k recessed d-ring 5000 lbs capacity 
•   Paint (aerosol or pint can)  

Ramps

•   light duty ramps** 
•   ramp door (4000 series, weld on)  
•   ramp gate (3000 series)  
•   ramp gate pin   w/chains 

**light duty ramps are 5 ft. long and have 3750 lb. capacity each

Safety Chains

•   Pair 3/16x24 w/hooks to 3500 lbs 
•   Pair 1/4x28  w/hooks to 7000 lbs
•   Pair 5/16x32 w/hooks to 10,000 lbs 
•   Pair 3/8 x 32 w/hooks to 23,000 lbs 
•   Strap winch, D.O.T. certified (4” bottom mounted weld on) 

Tongue jacks

•   1k top wind snap-ring mounted swing jack  
•   1.5k heavy duty tongue jack with wheel  
•   5k a-frame tongue jack  
•   5k side wind pipe mount swing jack  
•   7k top/side wind weld on drop leg jack  
•   10k drop leg jack  
•   750 lb. Swing up with wheel 
•   weld on bracket for 1k swing (ATW #80580)  
•   weld on bracket for 5k swing